KISS Acrylic Kit (AK100)
KISS Acrylic Kit (AK100)
All you need to fill in your acrylic nails as they grown out.
- Compatible with all KISS Professional Acrylic kits
- Enhanced powder won't trap air for a bubble free acrylic finish
- Contents: Acrylic Powder NET WT 7.5 g (.25 oz), Acrylic Liquid 14 mL (.50 US fl oz), Sculpting Brush, Nail File.
Product Description
All you need to fill in your acrylic nails as they grown out.
- Compatible with all KISS Professional Acrylic kits
- Enhanced powder won't trap air for a bubble free acrylic finish
- Contents: Acrylic Powder NET WT 7.5 g (.25 oz), Acrylic Liquid 14 mL (.50 US fl oz), Sculpting Brush, Nail File.
Ingredients/ Ingrédients: Acrylic Liquid/ Liquide Acrylique: Ethyl Methacrylate, HEMA, Glycol Dimethacrylate, Dimethyl Tolylamine, Benzophenone-3, Hydroquinone, Violet 2 (CI 60725)- Made in U.S.A./ Fabriquée aux États-Unis/ Acrylic Powder/ Poudre Acrylique: Polymethylmethacrylate, Acrylates Copolymer, Benzoyl Peroxide, PEG-12 Dimethicone - Made in U.S.A/ Fabriquée aux États-Unis
Avoid inhalation, ingestion, or prolonged contact with skin. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Read directions for use carefully. Acrylic Liquid is Flammable. Keep away from sources of ignition -- No smoking. KEEP OUT OF THE REACH OF CHILDREN. Discontinue use if irritation occurs. Do not use if nail or surrounding skin is damaged or inflamed. For professional use only. Warning: This product contains a chemical known to the State of California to cause cancer.
Use and Tips
Preparation: Clean nails with acetone-based nail polish remover. Gently buff area of new nail growth with the fine side of file, blending existing acrylic overlay.
HOW TO APPLY:
1. Apply KISS® Acrylic Primer to the growth area of natural nail only. Do not get on skin or cuticles. Let dry.
2. Place a small bead of acrylic mixture onto growth area where the natural nail meets the overlay. Allow to level then pull down to blend with the entire nail surface and pat down until smooth.
3. Allow acrylic to harden for 3 – 5 minutes. Tap the nail surface with a manicure stick. A sharp “clicking” sound means the overlay is dry.
4. File entire nail surface to smooth and even overlay surface.
5. Use fine side of file or a KISS® White Buff Block to smooth and finish.
6. Apply clear polish for a glossy finish.
HOW TO REMOVE: Do not force, pry or pull nails off. Trim as much length off as possible and soak in an acetone-based polish remover for approximately 20 minutes, continuously wiping nail surface on paper towels until overlay melts off completely.